Projoint Eliminator 5ltr

KEY FACTS:
 

• For all unpolished natural stone and porcelain (Including sensitive stone)
• Acid replacement technology (does not contain brick acid)
• Perfect for all interior and exterior walls & floors
• DIY friendly, doesn't damage surrounding materials
• Removes cement deposits in minutes

Not suitable for use in or around fish ponds or aquariums.
Not suitable for treating resin sheen from epoxy systems such as Titan.
Always test in a small inconspicous area first prior to treating a whole area.

• Why should I use ProJoint Eliminator?
  ProJoint Eliminator is an ECO-FRIENDLY innovative remover of cement residues, grout haze, efflorescence and salts from unpolished natural stone paving and porcelain surfaces.
• Does ProJoint Eliminator need to be diluted?
  Yes and no, we recommend the below dilution ratios:
  
  Light deposits – 1:4
  Medium-heavy deposits – 1:1
  Extreme deposits – Neat
• What material can I use ProJoint Eliminator on?
  ProJoint Eliminator is suitable for all unpolished natural stone, porcelain and sensitive stone such as black limestone.
• In what conditions can I apply ProJoint Eliminator?
  You can apply ProJoint Eliminator to damp surfaces; however, this may increase working times/decrease cleaning efficiency.
• How long does it take to work?
  This will vary depending on dilution ratio used:
  Light ratio – maximum 30 minutes

Medium/Heavy ratio – maximum 10 minutes
Extreme ratio – pre-wet area with water first, apply neat, agitate and rinse immediately.
(Ensure the area does not dry out and add extra solution if necessary)

• Does ProJoint Eliminator contain brick acid?
  No, our ProJoint Eliminator uses a brick acid free solution formulated from using advanced acid replacement technologies and techniques which is designed to be ECO friendly and doesn’t have any of the negative effects like damaging materials, like brick acid does.